We carry physical reality into the digital world with millimetric precision. Intelligent and parametric Digital Twins for decision-makers.
Forget measurements that take days with tape measures, non-aligning corner points, and \"missing measurement\" crises noticed after returning to the office. At EOS Proje, we carry your physical structures into the digital world with millimetric precision.
With our Point Cloud to BIM service, we transform the reality on-site (As-Built) into intelligent, parametric, and information-rich BIM models that you can use in your design and operation processes.
\"Whether it's a historical restoration or a complex industrial facility; we don't just offer you a 3D drawing, we provide a digital twin.\"
Unlike standard scanning services in the market, we don't see the process as just data collection. Processing data requires engineering.
By cleaning data with Autodesk ReCap and Leica Cyclone, we offer optimized data that doesn't slow down your computer.
Parametric Revit families with defined materials, layers, and types. You can take-off quantities and perform analysis.
By overlaying the model we created with the original point cloud, we offer Deviation Analysis and QC reports.
Our process follows a transparent and auditable flow.
| Step | Operation | Technology / Standard |
|---|---|---|
| 1 | Field Scanning Capturing X,Y,Z coordinates of the structure with millions of points per second using laser scanners. | LiDAR, SLAM, Drone Photogrammetry |
| 2 | Registration Merging partial scans into a single coordinate system and cleaning noise. | Leica Cyclone, Autodesk ReCap Pro |
| 3 | Modeling Creating architectural, structural, and MEP elements by tracing over the point cloud. | Autodesk Revit, ArchiCAD, Tekla |
| 4 | Quality Control (QA/QC) Performing clash and tolerance tests of the model against the point cloud. | Navisworks, Verity (Heat Maps) |
The superiority of AI and laser scanning technologies over traditional methods.
| Criterion | Traditional Method (Tape Measure) | 3D Laser Scanning (LiDAR) |
|---|---|---|
| Accuracy (Error Margin) | ±5 - 10 cm (Prone to human error) | ±1 - 3 mm (Millimetric precision) |
| Data Collection Speed | 500 m² / day | 10,000 m² / day (Leica RTC360) |
| Level of Detail | Only main measurements, details missing | All surfaces, deformations, curvatures |
| Cost / Efficiency | Low initial cost, High Revision Cost | High initial cost, Zero Revision |
| Output Formats | 2D CAD Drawing | 3D Point Cloud, BIM Model, Digital Twin |
| Intended Use | LOD 200 (Concept) | LOD 400 (Manufacturing) |
|---|---|---|
| Geometric Detail | General masses, approximate dimensions | Exact manufacturing dimensions, connection details |
| Information Density | Only area and volume info | Material, brand, model, installation date |
| Usage Area | Permit projects, preliminary studies | Application, quantity take-off, clash analysis |
| Pipe/Duct (MEP) | Single line schematic display | Supports, flanges, insulation details |
We use industry-standard hardware and software in our projects.
General mass, approximate dimensions. Ideal for fast volume studies and permit projects.
Specific systems, accurate quantities and dimensions. Standard architectural and structural projects.
Interaction of building elements with other systems. Required for clash analysis.
Installation details, manufacturing data. Production base for complex MEP and industrial facilities.
Exact digital twin of on-site fabrication. Includes facility management (FM) data.
Document wall curvatures and floor sags. Avoid surprise costs in renovation works.
Model complex pipe lines with millimetric precision. Test installation risks in the office with Clash Detection.
We digitally record irregular forms and deformations with contactless laser scanning for documentation.
Trust EOS Proje expertise to prevent surprise construction site costs and document the real state of your existing structure.